Home Faucet Repair Construction Plumbing

When it comes to taking care of your home, there is nothing more annoying than a dripping faucet. Not only can it keep you up all night, but it is additionally a waste of vital assets: water and money. A leaky faucet can boost your water bill in very quickly

Consistent maintenance plus inspections of faucets is necessary in residential plumbing and construction plumbing to keep your faucets working well. Utilizing preventative maintenance and inspections you can prevent having to phone a plumber to fix a faucet that is leaking samsung washer repair los angeles.

Residential plumbing needs maintenance and inspections very often to prevent major malfunctions. If your home has low water pressure or just a simple leak or two, you can do the repairs and maintenance yourself. The two most ordinary problems with a faulty faucet is loose nuts or a worn out washer.

Many plumbing problems are simple and easy to fix, such as fixing a leaking handle by tightening up loose connections.. Take off any decorative coverings on the handle, and find the nut at the bottom of the handle. Tighten the nut a bit, but do not over tighten. Then check to see if the issue has been fixed by turning the water on. If it hasn’t, tighten the nut a little at a time until the leak is repaired.

Another common source of a leaky faucet is a tatty washer. Check out the manufacturers documentation first, as some newer faucets are washerless, such as the Moen one handle faucets. Should this be your case, you can buy a simple repair kit at any hardware store. Otherwise, you can change out the washer yourself. All you need is a common wrench, a package of washers from the hardware store, and a screwdriver.

Repairing a shower or tub faucet may need a little extra effort since the valves are usually located behind walls. Check for an entrance door to the plumbing. If you can’t locate a access door, you may have to create one yourself, or, if you are not comfortable creating one, you should call a professional plumber.

1. Turn the water supply off, which should be located underneath the sink (or behind an access door if in a tub or shower).

2. Inspect to see if to turn the water off by turning the faucet to the on position.

3. Impede off the drain by using a cloth to stop things from falling down the drain by putting a towel over it.

4. Take off any decorative handle in order to get the nut.

5. Use electrical or masking tape to pad the wrench in order to prevent scratching the faucet.

6. Loosen the packing nut within the handle with the wrench. Turn it counter clockwise.

7. Twist the handle until you can remove the valve unit.

8. Take out the screw at the bottom of the valve. Find the washer.

9. Match the old washer with one from the package of new washers you bought. Be certain they are precisely the same size. If there is a different washer for hot and cold, make certain to use the washer designated for hot or cold water properly.

10. Install the new washer(s), replace the valve, turn the handle back to its correct position, and then tighten the nut(s).

11. Check for leaks by turning the water valves under the sink back to the on position and turning on the faucet.

If you still have major problems or leaks in the plumbing, it is be best to hire a professional plumber for faucet repair.

Leave a Reply

Your email address will not be published. Required fields are marked *